Ageing Network Infrastructure

What to review before support ends

November 19, 2026
|
Robert Roshan
|
Optimising Networks
,
Device Management
,
Tech Strategy
,

Ageing technology is a bigger problem than most organisations care to admit. 

In fact, according to a 2026-27 Readiness Report released by US consultant Kyndryl, 71% of leaders described their core IT estate as mostly or fully modernised. Yet only 30% said their network infrastructure was completely ready for future risks and disruptions. In Australia, fewer than three in ten leaders said their organisation was completely ready to manage cyberattacks.

That's the contradiction many organisations live with. A switch or firewall that still powers on and passes traffic looks like it's doing its job, so it rarely makes the replacement list. Yet the network it supports carries customer interactions, staff collaboration, cloud apps and all the data moving between them.

If your organisation runs network hardware that's more than a few years old, it's worth checking where that kit sits in its support lifecycle. This article will explain what end of support actually means, why it's a security and continuity issue, and six steps to work through before your network kit reaches that point.

‍

What does "Last Date of Support" mean?

Most IT teams track the last date of support (LDoS), if at all. LDoS is when a vendor stops all service and support, and the product becomes obsolete. But it isn't the first deadline that matters. Vendors wind support down in stages; sales end first, then bug fixes, then security fixes, with LDoS coming last.

Cisco Meraki's MX security appliances are a good example. The MX84 reached end of support on 31 October 2026, and the MX100 and MX64 follow in 2027. Like most vendors, Meraki narrows support in stages, moving to critical security fixes only before the final date. So if you're running one of these devices, the real question is what your plan is once support ends, and whether it'll be in place before then.

‍

Unsupported means unpatched

Network security depends on patching. When a vendor finds a flaw, it releases a fix, yet once security support ends, any new flaw found in that device stays open for as long as the device is in service.

We saw the same pattern emerge outside networking in October 2026. Critical vulnerabilities were found in PHP, the programming language behind most WordPress sites, with supported versions receiving an official fix on 21 October. Sites still running versions the PHP project no longer supports had to rely on their hosting provider, and some hosts took services offline as a precaution. Network hardware works in a similar way. An unsupported kit can leave you vulnerable when a flaw lands.

The Australian Signals Directorate (ASD) treats this as a priority. Its Annual Cyber Threat Report 2025-26 calls on every organisation to replace or mitigate legacy technology.

But where do you begin?

Start with edge devices. Firewalls, VPN gateways and routers face the internet directly, so a known flaw there can open a path to everything behind them. Attackers know it: US firm VulnCheck found that 42.5% of the network edge vulnerabilities exploited in 2025 affected devices that were end-of-life, or likely end-of-life. Patching and removing unsupported technology are also core to the Essential Eight, ASD's recommended baseline for cyber maturity.

‍

It's a resilience problem too

Security is only half the story. Resilience has two sides: recovering quickly from an attack, and keeping the business online when something fails.When you’re running ageing network kits, both of these are at risk. Once support ends, there's no vendor to escalate to and no guarantee of replacement parts. A failed core switch at one site can turn into a much longer outage than it should be.

That's why all organisations should look at security and connectivity together. For our clients, Cisco brings the security and networking expertise, Telstra keeps sites and users connected, and Byte brings both into one customer experience.

‍

Checklist: what to review before support ends

So, you know the risks. What can you do about them? If you're managing older network hardware, these six steps will help you turn a list of devices into a plan.

  1. Have you got a current list of every network device and its full lifecycle? Get one and record end of sale, end of security fixes and LDoS for each one, not just the final date.
  2. Map what depends on it. Note which sites, apps, users and services rely on each device, so you know what an outage would actually cost.
  3. Rank by exposure and impact. Start with internet-facing devices like firewalls and VPN gateways, then core switching, then the rest.
  4. Protect what you can't replace yet. Segment the network, tighten admin access and monitor ageing devices closely. These controls buy you time, but they don't remove the risk.
  5. Decide whether to replace, extend or integrate. Not every device needs a like-for-like swap. Sometimes the better move is to consolidate or make better use of what you already have.
  6. Plan for now, next and later. Put each item into a phased roadmap with an owner and a budget cycle, so replacements don't turn into emergencies.

‍

Start with what you can see and build a roadmap

You can't plan to replace devices you don't know about, so build the inventory first and check the security dates as well as LDoS. But this checklist is only a starting point. Understanding your full risk profile, which devices are nearing or past end of life and what to fix first takes a closer look.

That's what Byte and Learn is for. On Thursday 26 November 2026, from 12pm to 1pm AEDT, Byte, Telstra and Cisco are hosting a lunch and learn panel at the Telstra Customer Insight Centre, Level 26, 242 Exhibition Street, Melbourne. Our specialists will cover how to find where you're exposed, including ageing and end-of-life kit, and how to turn what you find into a practical roadmap. There are only 30 places, and lunch is on us. Register now.

Post-event CTA (swap in after 26 November): Talk to us about your network roadmap. Book a conversation with a Byte specialist.

‍

‍

Sources

‍

Robert Roshan
|
View LinkedIn profile
Robert (Ramin) Roshan is the Founder and CTO of Byte, a leading Australian digital transformation and technology services company. With more than three decades of experience helping organisations embrace innovation, Robert is recognised for his people-first leadership style and passion for creating positive business and community outcomes through technology.O

Further Reading

Ensuring Compliance with the Telecommunications and Other Legislation Amendment (Assistance and Access) Act 2018 in IT Companies

Current State of Cybersecurity in Australia

5 critical questions you need to consider when managing cyber attacks

Find out how we can support your business

Talk to us today

Follow us

Dive behind the scenes and keep up to date on the latest people centred tech.